RESIN ERA Clear Cast is a two-component modified; epoxy-based system suitable for clear casting
application. The material is clear, having excellent optical properties with negligible shrinkage on
curing. When both components are mixed in recommended ratios and cured appropriately at room temperature, an excellent casting can be achieved. By it, you can make beautiful, gorgeous resin projects and resin crafts. It is ideally used in casting Purpose.
APPLICATIONS:
ADVANTAGES:
TYPICAL SPECIFICATIONS:
TEST |
RESIN |
HARDENER |
DESCRIPTION |
BY VISUAL CLEAR, TRANSPARENT |
BY VISUAL CLEAR, TRANSPARENT |
VISCOSITY AT 25°C |
1,600 - 2,600 m Pas |
10 - 25 m Pas |
COLOUR |
BY VISUAL COLOURLESS |
BY VISUAL COLORLESS |
SPECIFIC GRAVITY |
1.15 - 1.20 |
0.92 - 0.96 |
MIX SPECIFICATIONS:
TEST |
VALUE |
MIXING RATIO (RESIN: HARDENER) AT 25°C |
90:30 w/w (3:1) |
MIX VISCOSITY AT 25°C |
400 - 700 m Pas |
POT LIFE AT 25°C |
45 Min |
SURFACE DRY AT 25°C |
6-8 hr |
TOUCH DRY AT 25°C |
12-15 hr |
FULLY CURED AT 25°C |
24-48 hr |
HOW TO USE:
TROUBLESHOOTING:
PROBLEM |
CAUSE |
Uncured after 24 hours to 48 hours |
Wrong mix ratio and | or low ambient temperature (Resin Quantity increases then Ratio or Hardener Quantity decreases then Ratio ) |
Fast Cure or Heat up to much |
Wrong mix ratio (Resin Quantity decreases then Ratio or Hardener Quantity increases then Ratio) |
Sticky | greasy | hazy surface |
High humidity, Improper Ratio |
Dents or Wrinkles on Surface |
Art Piece is not leveled or Mixture of Resin and hardener Poured after or about end of pot life |
PACKAGING: RESIN ERA Ultra Clear is available in 1.2 Kg & 8 kg packing.
STORAGE AND HANDLING: RESIN ERA Clear Cast should be stored in a cool and dry place, preferably in a sealed container, and should not be exposed to direct sunlight. This product has a shelf life of one year if stored in its original container between 2°C and 40°C away from humidity and excessive heat.
SAFETY: Wear personal protective equipment (Wear mask and gloves). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Avoid breathing vapours, mist, or gas.
QUICK TIP : Use a larger container if your resin quantity is greater. We recommend this because it generates heat through an exothermic reaction, the sudden increase in heat causes it to harden quickly and become a solid rock within 10-15 minutes.